Frequently asked questions

Does anti-slip paper also work in automated packing lines with vacuum lifters?

 

Yes, we have developed and optimized the coating of our ASP-2001 anti-slip paper so that, depending on the technical possibilities on site, our special paper can be removed automatically by robots from a grammage of 100 gr/sqm. We have paid great attention to preventing any blocking so that only one interleaf paper is removed at a time. When purchasing raw material paper, we attach great importance to absolutely consistent quality and examine every batch in our laboratory in order to subsequently store the samples for optimum traceability. Furthermore, we only purchase very high-quality base paper, as the higher fiber density (< air permeability) supports flawless use with removal robots.

Can I get other sizes than e.g. 74x114 cm (for EUR pallets), or 94x114 cm (for industrial pallets)?

We can produce virtually any format for you up to a maximum size of 160 cm, as we stock a large number of different raw paper roll widths and then apply our "secret" coating to them for you before your ASP-2001 AntiSlip Paper is cut to your desired format in the next step by an automatic, state-of-the-art cutting machine. If your demand is less than one pallet, we have the possibility to cut your desired format from our standard formats by another cutting machine - for example, we are allowed to support confectioners with small anti-slip cuts for their cake boxes.

Do I also get the ASP-2001 AntiSlip Paper in rolls?

Of course, because we always produce anti-slip paper rolls as the first step. However, due to the automated cutting process afterwards and in relation to slightly higher freight costs (as the blanks are optimally palletized "without air"), the price per square meter remains similar. Furthermore, it should be noted that for the use of anti-slip paper rolls, a suitable cutting machine is used, which always has a cut anti-slip paper ready for use.

Can I buy my anti-slip paper from J.N. Lüning & Co. if my requirements are less than a pallet?

We stock all standard grammages & formats in our distribution warehouse in Bremen and can help you roughly from a requirement of approx. 1,000 sheets. We can even produce / cut special formats for you here with our cutting machine, even in smaller quantities.

Is ASP-2001 AntiSlip Paper waterproof?

Due to the special anti-slip coating, our special paper has a certain COBB value, which varies a little depending on the grammage / quality. Visually, you can imagine the effect as a drop of water landing on a GORE-TEX jacket - so the water "rolls off". However, since we are talking about a sustainable paper that does not have a plastic coating, there are limits to what can be done with very heavy moisture. However, in the event that an absolutely waterproof paper is desired, we also have a special custom coating.

What is the sliding friction coefficient, or coefficient of friction, of anti-slip paper?

This value is decisive for the load securing values of anti-slip paper and is measured in different ways. The value 0.6 µ is often mentioned, for example, as this is specified as a guideline value by the VDI standard 2700 sheet 14. This value can be met with our high-quality ASP-2001 anti-slip paper for almost all material pairings. We would like to explain this in more detail below: Our AntiSlip Paper is designed as an intermediate pallet layer to protect smooth surfaces (e.g. coated/printed cartons) against shifting. We focus on a particularly even and smooth surface, as experience has shown that this is the best way to achieve the sliding friction values on very slippery surfaces - figuratively, you can imagine the ASP surface as if the smallest gripping arms were gripping the small irregularities of a smooth surface. Accordingly, the value of 0.6 µ is far exceeded, for example, with the material pairing metal-slip paper-metal, whereas a lower sliding friction value is to be expected with very uneven surfaces.

Can I bring my food directly in contact with ASP-2001 AntiSlip Paper?

The special feature of our anti-slip paper is that we have a food safety declaration - as we are one of the few anti-slip paper manufacturers that produce the coating ourselves and do not use plastic or toxic substances. However, it is important to note that although the anti-slip coating is food safe, the same must also apply to the base paper in the case of fatty and moist foods. For this reason, only our 65 gr/sqm anti-slip paper is suitable.

Can the anti-slip paper be used more than once?

Generally speaking, the anti-slip paper retains its effect even after multiple uses, but the higher the grammage, the more likely the paper will not be damaged after multiple uses. After its service life, our anti-slip paper can be perfectly processed into new paper in the paper recycling cycle in a sustainable way.

 

We will be happy to answer your questions by phone & email. The best way to reach us is to call 0421 38906 0 or write to info@j-n-luening.de